409 Group is Fully Licensed: Plumbing #RMP41398 • HVAC #TACLA006605C • Electrical #TECL40338
409 Group is Fully Licensed: Plumbing #RMP41398 • HVAC #TACLA006605C • Electrical #TECL40338
($300 at sign-up, then $10/month while an active member)
All water heaters are checked for safety, leaks and signs of corrosion. Includes connections, shut-off valve, vent piping, temperature and pressure valve (T&P), flush, anode rod, and more. If a suitable drain valve is present, your water heater will be drained and flushed and your water heater’s anode rod will be removed and checked (if possible). 1 Heater De-Scale per home included for FREE.
VIP Members receive a visual inspection of the unit during their VIP CLUB maintenance visit, which includes opening the panel and checking for any error codes as well as a professional descaling service which is recommended by most manufacturers.
VIP Members can call for Drain Cleaning service Monday thru Sunday. Drain Cleaning is not a standard part of the annual CLUB maintenance visit.
Includes plumbing inspection of garbage disposal, dishwasher, sink, faucet, drain and water lines.
Includes sinks, faucets, shut-offs, toilet functionality, tub/shower connections, drains, shower heads and more.
All toilets are checked and tested for leaks and smooth operation.
All faucets are tested and must pass a rigid “Performance Test.”
All exposed water lines are checked for any damage.
All piping under your bathroom and kitchen sinks are checked for any sign of potential water damage.
All drains are checked above and below sinks for leaks and clogs.
Washing machine hoses and valves are thoroughly checked.
If you have any concerns or questions about your plumbing, such as hot water issues, water pressure, water purification, leaks, or otherwise, your technician can help assess or recommend solutions.
Build-up on the coil reduces the system’s ability to cool, making your air conditioning run longer, increasing energy consumption and raising your cooling costs.
Foreign material on the condenser reduces the system’s cooling capacity. A dirty coil will increase your cooling cost by 50% or more, and can shorten the life of your air conditioner.
Motors are designed to operate at standard voltage and amperage draw. By measuring amperage draw, problems can be identified before the unit fails.
Loose electrical connections are a common source of problems which cause your electric parts to fail and your air conditioner to become inoperative.
To ensure even temperature control for your environment.
Check the air filter for any debris or excessive amounts of dust accumulation.
Adjustment of blower components necessary for adequate airflow to ensure furnace can deliver maximum heating capacity and efficiency.
Assure that the system is cycling properly, and that controls are calibrated correctly.
Proper gas pressure will ensure the most efficient and safe burner operation and reduces energy costs.
Proper adjustment of blower and components is necessary for adequate airflow to assure maximum cooling performance.
As furnaces age, cracks can develop in the heat exchanger, which can allow dangerous gases (including carbon monoxide) to enter the home & cause danger. Includes heating system inspection to determine any hazard.
An obstructed flue will cause products of combustion to enter home.
The heat anticipator determines how often your furnace cycles and will affect the cost of operation, as well as the comfort level.
A properly adjusted ignition assures that furnace will start reliably.
Properly adjusted blower speed will ensure efficient and reliable furnace operation and comfort.
Loose electrical connections are a cause of equipment failure.
Motors are designed to operate at standard voltage and amperage draw. By measuring amperage draw, problems can be identified before the unit fails.
To ensure even temperature control throughout home.
Check for any microbial growth around ducts and vents.
Check for Carbon Monoxide gas from the running furnace.
Ensure that air filter is clear of debris and dust.
Inspect furnace for any loose gas lines or faulty connections.
We inspect the Main Electrical Panel/Load Center to ensure the wire connections are properly connected to the break and buss bar. The screws connecting the wire to the breakers can become loose over time. We also use thermal imaging to identify any hot spots on the breakers and connections. (Excludes main overcurrent device).
Not having proper surge protection is putting much more than your electronics at risk, but your Air Conditioning/Heating systems, all Appliances, and any other items tied to your electrical system.
Without proper grounding, any excess electricity flows back into the home, further damaging appliances and could create serious electrical hazards.
Back-stabbed outlets could become loose over time and start to melt the back of the receptacle. This could cause an electrical hazard.
We inspect 1-2 receptacles per circuit for reverse polarity, missing ground, and incorrect wiring. We also check if they are “tamper-resistant.”
Unprotected splices can become loose, shock someone, or cause an electrical hazard.
Improper Voltage (too low or too high) could shorten the service life of your appliances or make them inoperable
We inspect accessible smoke and carbon monoxide detectors for proper interconnect operation.
We inspect and test GFCI where required by current code. GFCIs are required near all water sources in your home. Pre-existing GFCIs can become worn and degrade over time, not tripping as quickly. GFCIs tripping out of the acceptable range would prompt replacement.
We inspect and test the ARC Fault Breakers for proper function and safety.
We inspect & test the GFCI Breakers for proper function and safety.
Improper Voltage (too low or too high) could shorten the service life of your appliances or make them inoperable
The 409 Club VIP Member Subscription is a monthly subscription between the Seller (409 Group LLC) and the Customer (VIP Member) providing access to specific benefits and/or discounts provided for in membership agreement.
VIP Members can use any or all services and benefits included in VIP Member Subscription Plan beginning upon the date of purchase, including, but not limited to, annual maintenance such as air conditioning, heating, plumbing and electrical tune-ups or inspections, drain cleaning, vouchers, discounted service fees or diagnostics and extended warranties for repairs made while active VIP Member. It is the sole responsibility of the Customer to utilize any or all the services, discounts and benefits included with the VIP Member Subscription.
Seller is not responsible for the underutilization of any VIP Member benefits and is under no obligation to refund any portion of services, benefits or discounts not utilized during the subscription term or at time of cancellation. Customer agrees to receive communications from Seller in the form of direct mail, email, SMS/Text or phone calls that may include reminders about benefits available, access to account information, special offers, scheduling recommendations and so forth. However, it is still up to the Customer to be familiar with and to take advantage of any or all benefits as wanted or needed, and Seller is not responsible for underutilization of the benefits.
The VIP Member Subscription is a monthly recurring credit card transaction. It is up to the customer to provide and maintain a valid credit card on file while an active member. If Customer does not provide updated credit card information or approval to re-process payment within 2 weeks of a declined transaction, it will be considered canceled. 2-Week Cancellation required via phone or email (with verification of receipt by 409 Group). No refunds provided for prior charges previously agreed to as part of membership subscription agreement.
Abacus also reserves the right to terminate subscription/agreement with notice to the customer and will automatically prevent future billing from occurring upon notice.
1. Free Estimates (aka no trip fees/no service fees – $49.95 Value per Visit)
2. FREE Drain Cleaning ($125 – $400 Average Value)
All repair options and pricing provided up front at time of service with customer approval before work begins and VIP Members receive 2-Year Parts & Labor Warranty while maintaining an active VIP Membership, or warranty will revert to standard warranties provided for specific services provided.
